Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM
RM37H0E _59 Vehicle Exterior _093353 LIGHTING (EXT) _0448416 LIGHTING SYSTEM C

LIGHTING (EXT)  LIGHTING SYSTEM  U0073  Control Module Communication Bus "A" Off  U0100  Lost Communication with ECM/PCM/EV "A"  U0101  Lost Communication with TCM  U0126  Lost Communication with Steering Angle Sensor Module  U0129  Lost Communication with Brake System Control Module  U0142  Lost Communication with Body Control Module "B"  U0155  Lost Communication with Instrument Panel Cluster (IPC) Control Module  U0242  Lost Communication With Headlamp Control Module "B"  U0293  Lost Communication with Hybrid Vehicle Control System  


DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority Note
U0073 Control Module Communication Bus "A" Off The headlight ECU sub-assembly LH does not send/receive data. CAN communication system AFS B w/ Adaptive High Beam System
U0100 Lost Communication with ECM/PCM/EV "A" The headlight ECU sub-assembly LH does not receive data from the ECM for approximately 10 seconds or more. CAN communication system AFS B w/ Adaptive High Beam System
U0101 Lost Communication with TCM The headlight ECU sub-assembly LH does not receive data from the EV control ECU for approximately 10 seconds or more. CAN communication system AFS B w/ Adaptive High Beam System
U0126 Lost Communication with Steering Angle Sensor Module The headlight ECU sub-assembly LH does not receive data from the steering sensor for approximately 10 seconds or more. CAN communication system AFS B w/ Adaptive High Beam System
U0129 Lost Communication with Brake System Control Module The headlight ECU sub-assembly LH does not receive data from the skid control ECU assembly for approximately 10 seconds or more. CAN communication system AFS B w/ Adaptive High Beam System
U0142 Lost Communication with Body Control Module "B" The headlight ECU sub-assembly LH does not receive data from the main body ECU (multiplex network body ECU) for approximately 10 seconds or more. CAN communication system AFS B w/ Adaptive High Beam System
U0155 Lost Communication with Instrument Panel Cluster (IPC) Control Module The headlight ECU sub-assembly LH does not receive data from the combination meter assembly circuit plate for approximately 10 seconds or more. CAN communication system AFS B w/ Adaptive High Beam System
U0242 Lost Communication With Headlamp Control Module "B" The headlight ECU sub-assembly LH does not receive data from the headlight ECU sub-assembly RH circuit plate for approximately 10 seconds or more. CAN communication system AFS B w/ Adaptive High Beam System
U0293 Lost Communication with Hybrid Vehicle Control System The headlight ECU sub-assembly LH does not receive data from the EV control ECU for approximately 10 seconds or more. CAN communication system AFS B w/ Adaptive High Beam System

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority Note
U0073 Control Module Communication Bus "A" Off The headlight ECU sub-assembly LH does not send/receive data. CAN communication system HL AutoLeveling B w/o Adaptive High Beam System
U0100 Lost Communication with ECM/PCM/EV "A" The headlight ECU sub-assembly LH does not receive data from the ECM for approximately 10 seconds or more. CAN communication system HL AutoLeveling B w/o Adaptive High Beam System
U0101 Lost Communication with TCM The headlight ECU sub-assembly LH does not receive data from the EV control ECU for approximately 10 seconds or more. CAN communication system HL AutoLeveling B w/o Adaptive High Beam System
U0126 Lost Communication with Steering Angle Sensor Module The headlight ECU sub-assembly LH does not receive data from the steering sensor for approximately 10 seconds or more. CAN communication system HL AutoLeveling B w/o Adaptive High Beam System
U0129 Lost Communication with Brake System Control Module The headlight ECU sub-assembly LH does not receive data from the skid control ECU assembly for approximately 10 seconds or more. CAN communication system HL AutoLeveling B w/o Adaptive High Beam System
U0142 Lost Communication with Body Control Module "B" The headlight ECU sub-assembly LH does not receive data from the main body ECU (multiplex network body ECU) for approximately 10 seconds or more. CAN communication system HL AutoLeveling B w/o Adaptive High Beam System
U0155 Lost Communication with Instrument Panel Cluster (IPC) Control Module The headlight ECU sub-assembly LH does not receive data from the combination meter assembly circuit plate for approximately 10 seconds or more. CAN communication system HL AutoLeveling B w/o Adaptive High Beam System
U0242 Lost Communication With Headlamp Control Module "B" The headlight ECU sub-assembly LH does not receive data from the headlight ECU sub-assembly RH circuit plate for approximately 10 seconds or more. CAN communication system HL AutoLeveling B w/o Adaptive High Beam System
U0293 Lost Communication with Hybrid Vehicle Control System The headlight ECU sub-assembly LH does not receive data from the EV control ECU for approximately 10 seconds or more. CAN communication system HL AutoLeveling B w/o Adaptive High Beam System

PROCEDURE

1.CHECK VEHICLE TYPE
a.

Check vehicle condition.


Result:
Result Proceed to
w/ Adaptive High Beam System A
w/o Adaptive High Beam System B



A

2.CLEAR DTC

B

4.CLEAR DTC
2.CLEAR DTC

Pre-procedure1

a.

None


Procedure1

a.

Clear the DTCs.

Body Electrical > AFS > Clear DTCs
50002 165
Result:
Proceed to
NEXT



Post-procedure1

a.

None



NEXT

3.CHECK FOR DTC
3.CHECK FOR DTC

Pre-procedure1

a.

Turn the ignition switch to ON and wait for at least 10 seconds or more.


Procedure1

a.

Check for DTCs.

Body Electrical > AFS > Trouble Codes
50001 165
Result:
Result Proceed to
U0073, U0100, U0101, U0126, U0129, U0142, U0155, U0242 and U0293 are not output A
U0073, U0100, U0101, U0126, U0129, U0142, U0155, U0242 or U0293 is output B



Post-procedure1

a.

None



A

B

4.CLEAR DTC

Pre-procedure1

a.

None


Procedure1

a.

Clear the DTCs.

Body Electrical > HL AutoLeveling > Clear DTCs
50002 361
Result:
Proceed to
NEXT



Post-procedure1

a.

None



NEXT

5.CHECK FOR DTC
5.CHECK FOR DTC

Pre-procedure1

a.

Turn the ignition switch to ON and wait for at least 10 seconds or more.


Procedure1

a.

Check for DTCs.

Body Electrical > HL AutoLeveling > Trouble Codes
50001 361
Result:
Result Proceed to
U0073, U0100, U0101, U0126, U0129, U0142, U0155, U0242 and U0293 are not output A
U0073, U0100, U0101, U0126, U0129, U0142, U0155, U0242 or U0293 is output B



Post-procedure1

a.

None



A

B