| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|
| U0101 | Lost Communication with TCM | Communication stop occurs between the main body ECU (multiplex network body ECU) and hybrid vehicle control ECU continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U0111 | Lost Communication with Battery Energy Control Module "A" | Communication stop occurs between the main body ECU (multiplex network body ECU) and battery ECU assembly continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U0120 | Lost Communication With Starter / Generator Control Module | Communication stop occurs between the main body ECU (multiplex network body ECU) and certification ECU (smart key ECU assembly) continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U0126 | Lost Communication with Steering Angle Sensor Module | Communication stop occurs between the main body ECU (multiplex network body ECU) and steering sensor continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U0129 | Lost Communication with Brake System Control Module | Communication stop occurs between the main body ECU (multiplex network body ECU) and skid control ECU assembly continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U0151 | Lost Communication with Restraints Control Module | Communication stop occurs between the main body ECU (multiplex network body ECU) and airbag ECU assembly continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U0155 | Lost Communication with Instrument Panel Cluster (IPC) Control Module | Communication stop occurs between the main body ECU (multiplex network body ECU) and combination meter assembly continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U0163 | Lost Communication with Navigation Control Module | Communication stop occurs between the main body ECU (multiplex network body ECU) and radio receiver assembly continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U0164 | Lost Communication with HVAC Control Module | Communication stop occurs between the main body ECU (multiplex network body ECU) and air conditioning amplifier assembly continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U0182 | Lost Communication with AFS | Communication stop occurs between the main body ECU (multiplex network body ECU) and headlight ECU sub-assembly LH continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U0199 | Lost Communication with "Door Control Module A" | Communication stop occurs between the main body ECU (multiplex network body ECU) and front multiplex network door ECU RH continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U0200 | Lost Communication with "Door Control Module B" | Communication stop occurs between the main body ECU (multiplex network body ECU) and front multiplex network door ECU LH continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U0201 | Lost Communication with "Door Control Module C" | Communication stop occurs between the main body ECU (multiplex network body ECU) and rear multiplex network door ECU RH continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U0202 | Lost Communication with "Door Control Module D" | Communication stop occurs between the main body ECU (multiplex network body ECU) and rear multiplex network door ECU LH continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U0208 | Lost Communication with "Seat Control Module A" | Communication stop occurs between the main body ECU (multiplex network body ECU) and position control ECU assembly continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U0230 | Lost Communication with Rear Gate Module | Communication stop occurs between the main body ECU (multiplex network body ECU) and luggage closer motor assembly continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U023A | Lost Communication With Image Processing Module "A" | Communication stop occurs between the main body ECU (multiplex network body ECU) and forward recognition camera continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U0293 | Lost Communication With Hybrid Powertrain Control Module | Communication stop occurs between the main body ECU (multiplex network body ECU) and hybrid vehicle control ECU assembly continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U0327 | Software Incompatibility with Vehicle Security Control Module | Communication stop occurs between the main body ECU (multiplex network body ECU) and certification ECU (smart key ECU assembly) continuously for approximately 10 seconds or more. | CAN communication system | Main Body | B | - |
| U1104 | Lost Communication with Driving Support ECU | Communication stop occurs between the main body ECU (multiplex network body ECU) and forward recognition camera continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U1106 | Lost Communication with Electric Parking Brake Module | Communication stop occurs between the main body ECU (multiplex network body ECU) and parking brake ECU assembly continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U1114 | Lost Communication with Main Switch Module | Communication stop occurs between the main body ECU (multiplex network body ECU) and rear power seat switch continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
| U1115 | Lost Communication with Tilt & Telescopic Module | Communication stop occurs between the main body ECU (multiplex network body ECU) and multiplex tilt and telescopic ECU continuously for 10 seconds or more. | CAN communication system | Main Body | B | - |
Pre-procedure1
None
Procedure1
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
Post-procedure1
None
NEXT
Pre-procedure1
Turn the ignition switch to ON and wait for at least 10 seconds or more.
Procedure1
Check for DTCs.
| Result | Proceed to |
|---|---|
| U0100, U0111, U0120, U0126, U0129, U0151, U0155, U0163, U0164, U0182, U0199, U0200, U0201, U0202, U0208, U0230, U023A, U0293, U0327, U1104, U1106, U1114 and U1115 are not output | A |
| U0100, U0111, U0120, U0126, U0129, U0151, U0155, U0163, U0164, U0182, U0199, U0200, U0201, U0202, U0208, U0230, U023A, U0293, U0327, U1104, U1106, U1114 or U1115 is output | B |
Post-procedure1
None
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING