Home › ADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › ADAPTIVE HIGH BEAM SYSTEM
RM37H0E _95 ADAS / AD _095317 ADVANCED DRIVER ASSISTANCE SYSTEM _0448417 ADAPTIVE HIGH BEAM SYSTEM L

ADVANCED DRIVER ASSISTANCE SYSTEM  ADAPTIVE HIGH BEAM SYSTEM  PRECAUTION  


PRECAUTION WHEN REPLACING HEADLIGHT ECU SUB-ASSEMBLY LH


a.

If the headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight ECU sub-assembly LH.

Click hereADAS / AD>ADVANCED DRIVER ASSISTANCE SYSTEM>ADAPTIVE HIGH BEAM SYSTEM>REGISTRATION



PRECAUTION FOR ADAPTIVE HIGH BEAM SYSTEM


a.

The adaptive high beam system may not operate correctly under the following conditions.

Factor Condition
Weather/Climate
·

When driving in bad weather (rain, snow, fog, sandstorms, etc.).

·

The temperature inside the vehicle is high.

·

The taillights of a proceeding vehicle are obscured by snow, etc.


Front windshield Refer to Front Camera System.
(Click here)
Forward recognition camera Refer to Front Camera System.
(Click here)
Nearby vehicles or lights
·

When lights similar to headlights or taillights are in the vicinity of the vehicle.

·

When a nearby vehicle has no lights or its lights are off.

·

When a vehicle in front has misaligned lights, or its lights are changing color.

·

When a vehicle in front has extremely dirty headlights or taillights.


Road conditions
·

When driving in areas where the conditions often change between bright and dark.

·

When driving on hilly roads.

·

When driving on winding roads or around sharp curves.

·

When driving on bumpy roads (cobblestone paving, gravel roads, rough unpaved roads, etc.).

·

When highly reflective objects are in front of the vehicle (mirrors, road signs, etc.).


Own vehicle
·

When the headlights are damaged, deformed or dirty.

·

When the vehicle posture is abnormal (posture has changed due to the vehicle being fully loaded, a trailer being towed, road conditions, etc.).

·

When the vehicle has other malfunctions or has been modified.


Adaptive high beam system Malfunction:
When the adaptive high beam indicator light on the combination meter assembly is off and "Headlight System Malfunction Visit Your Dealer" is displayed on the multi-information display.
Others:
·

When the adaptive high beam system does not seem to be turning the high beam headlights on and off properly.

·

When the adaptive high beam system is frequently turning the high beam headlights on and off.

·

When the glare from the high beam headlights would disturb pedestrians or the drivers of other vehicles.