Home › ADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › ADAPTIVE HIGH BEAM SYSTEM
RM37H0E _95 ADAS / AD _095317 ADVANCED DRIVER ASSISTANCE SYSTEM _0448417 ADAPTIVE HIGH BEAM SYSTEM C

ADVANCED DRIVER ASSISTANCE SYSTEM  ADAPTIVE HIGH BEAM SYSTEM  U012587  Lost Communication with Multi-axis Acceleration Sensor Module Missing Message  U012987  Lost Communication with Brake System Control Module Missing Message  U014087  Lost Communication with Body Control Module Missing Message  U029387  Lost Communication With Hybrid Powertrain Control Module Missing Message  


DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
U012587 Lost Communication with Multi-axis Acceleration Sensor Module Missing Message Communication stop occurs between the forward recognition camera and yaw rate sensor (airbag ECU assembly) continuously for 5 seconds or more.
·

CAN communication system

·

Airbag ECU assembly (yaw rate sensor)

·

Forward recognition camera


Front Recognition Camera (Front Lighting Control) B
U012987 Lost Communication with Brake System Control Module Missing Message Communication stop occurs between the forward recognition camera and No. 2 skid control ECU (brake actuator assembly) continuously for 5 seconds or more.
·

CAN communication system

·

No. 2 skid control ECU (brake actuator assembly)

·

Forward recognition camera


Front Recognition Camera (Front Lighting Control) B
U014087 Lost Communication with Body Control Module Missing Message Communication stop occurs between the forward recognition camera and main body ECU (multiplex network body ECU) continuously for 5 seconds or more.
·

CAN communication system

·

Main body ECU (multiplex network body ECU) and

·

Forward recognition camera


Front Recognition Camera (Front Lighting Control) B
U029387 Lost Communication With Hybrid Powertrain Control Module Missing Message Communication stop occurs between the forward recognition camera and EV control ECU continuously for 5 seconds or more.
·

CAN communication system

·

EV control ECU

·

Forward recognition camera


Front Recognition Camera (Front Lighting Control) B

PROCEDURE

1.CHECK FOR DTC

Pre-procedure1

a.

Clear the DTCs.

Body Electrical > Front Recognition Camera (Front Lighting Control) > Clear DTCs
50002 433

b.

Turn the ignition to switch ON and wait for at least 5 seconds or more.


Procedure1

a.

Check for DTCs.

Body Electrical > Front Recognition Camera (Front Lighting Control) > Trouble Codes
50001 433
Result:
Result Proceed to
U012587, U012987, U014087 and U029387 are not output A
U012587, U012987, U014087 and U029387 are output B



Post-procedure1

a.

None



A

B