INSTALL CUSTOMIZE THEFT DETERRENT SYSTEM
The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the GTS.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Warning by Horn | This function is used to enable or disable the warning by horn.*1 | ON | 0:OFF,1:ON | Main Body ECU (Multiplex Network Body ECU) |
| Intrusion Win Opened | This function is used to enable or disable the window open warning. | OFF | 00:OFF,01:ON | Main Body ECU (Multiplex Network Body ECU) |
| Security control with mechanism key | This function makes it possible to cancel the security alarm with the mechanical key. | ON*2
OFF*2 |
0:OFF,1:ON | Main Body ECU (Multiplex Network Body ECU) |
| Window Open Warning | This function is used to enable or disable the window open warning. | ON | 0:OFF,1:ON | Main Body ECU (Multiplex Network Body ECU) |
| Intrusion Sensor Sound Detection Function | Set to detect an intrusion using the sound detection function. | ON | 0:OFF,1:ON | Main Body ECU (Multiplex Network Body ECU) |
| Intrusion Sensor Sensitivity Level | This function adjusts sensitivity of the sensor that detects intrusions. | Normal | 0:Low,1:Normal | Main Body ECU (Multiplex Network Body ECU) |
*1: w/ Answer-back (Wireless Door Lock Buzzer) Function
*2: The default setting differs depending on the country.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Panic Function | This function operates the theft deterrent system by continuously pressing the panic switch on the electrical key transmitter sub-assembly for 0.8 seconds* | ON | 0:OFF,1:ON | Main Body ECU (Multiplex Network Body ECU) |
*: w/ Panic Switch