Home › Engine / Hybrid System › INTAKE / EXHAUST › AIR CONTROL VALVE
RM37H0E _51 Engine / Hybrid System _095594 INTAKE / EXHAUST _0448989 AIR CONTROL VALVE G

INTAKE / EXHAUST  AIR CONTROL VALVE  INSPECTION  


PROCEDURE

Hide 17C10 1.INSPECT FC AIR PRESSURE REGULATOR ASSEMBLY

a.
A478586C02
1.552,0.094 1.906,0.292 0.354,0.198 1.552,0.333 1.917,0.531 0.365,0.198 0.677,1.927 1.052,1.396 true 1.396,1.927 1.396,1.417 true 0.073,0.083 0.385,0.375 0.313,0.292 10 false *a 0.552,1.948 0.792,2.125 0.24,0.177 10 false M+ 1.323,1.969 1.563,2.146 0.24,0.177 10 false M- 1.604,0.115 2.063,0.313 0.458,0.198 10 false B14 1.604,0.354 2.063,0.552 0.458,0.198 10 false B16 1.958,0.115 2.271,0.406 0.313,0.292 10 false *b 1.969,0.354 2.281,0.646 0.313,0.292 10 false *c
*a Component without harness connected
(FC Air Pressure Regulator Assembly)
*b Air Sealing Valve
*c Air Pressure Regulating Valve


Measure the resistance according to the value(s) in the table below.

Standard Resistance (Air Sealing Valve):
Tester Connection Condition Specified Condition

Click Location & Routing(B14)Location & Routing

Click Connector(B14)Engine Compartment>No. 2 Stack Wire>FC Air Pressure Regulator Assembly (Air Shut Valve)

B14-5(M-) - B14-6(M+) 25 °C (77 °F) 2.11 to 2.33 Ω


Standard Resistance (Air Pressure Regulating Valve):
Tester Connection Condition Specified Condition

Click Location & Routing(B16)Location & Routing

Click Connector(B16)Engine Compartment>No. 2 Stack Wire>FC Air Pressure Regulator Assembly (Air Pressure Regulation Valve)

B16-5(M-) - B16-6(M+) 25 °C (77 °F) 2.11 to 2.33 Ω



b.

If the result is not as specified, replace the FC air pressure regulator assembly.