Home › Engine / Hybrid System › INTAKE / EXHAUST › AIR BYPASS VALVE
RM37H0E _51 Engine / Hybrid System _095594 INTAKE / EXHAUST _0448990 AIR BYPASS VALVE G

INTAKE / EXHAUST  AIR BYPASS VALVE  INSPECTION  


PROCEDURE

Hide 17C90 1.INSPECT FC AIR BY-PASS VALVE ASSEMBLY

a.
A478586C01
1.531,0.24 1.885,0.448 0.354,0.208 2.823,1.906 2.448,1.396 true 2.135,1.938 2.135,1.427 true 0.073,0.083 0.385,0.375 0.313,0.292 10 false *a 2.073,1.969 2.344,2.125 0.271,0.156 10 false M+ 2.792,1.948 3.052,2.115 0.26,0.167 10 false M- 1.604,0.281 2.063,0.479 0.458,0.198 10 false B15
*a Component without harness connected
(FC Air By-pass Valve Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(B15)Location & Routing

Click Connector(B15)Engine Compartment>No. 2 Stack Wire>FC Air By-Pass Valve Assembly

B15-1(M-) - B15-2(M+) 25 °C (77 °F) 2.11 to 2.33 Ω



b.

If the result is not as specified, replace the FC air by-pass valve assembly.