Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM
RM37H0E _58 Vehicle Interior _095313 DOOR LOCK _0452394 POWER DOOR LOCK CONTROL SYSTEM W

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the GTS

i.

Select the setting by referring to the table below.

Door Lock
Tester Display Description Default Setting ECU
Unlock Key Twice Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
Auto Lock Function that locks all of the doors when the vehicle speed reaches a certain level. ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
Auto Lock/Shift Function that locks all of the doors when the shift lever is moved to select another shift state with park (P) selected, the ignition switch on (READY) and all doors closed. OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
Auto Unlock/Shift Function that unlocks all of the doors when the P position switch (shift position indicator) is pushed with a shift state other than park (P) selected and the ignition switch on (READY). OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
All Unlock/Open-Close Function that unlocks the other doors when the driver door is opened within approximately 45 seconds of the ignition switch being turned off. ON*
OFF*
0:OFF,1:ON Main body ECU (Multiplex network body ECU)
50006 2

*: The default setting differs depending on the country.




b.

Customizing with the Multi-display

i.

Turn the ignition switch to ON.


ii.

Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Door lock settings.


iii.

Select the setting by referring to the table below.

Display Default Content Setting Relevant ECU
Speed sensitive auto locking On Function that locks all of the doors when the vehicle speed reaches a certain level. On or Off Main body ECU (Multiplex network body ECU)
Auto lock by shift from P Off Function that locks all of the doors when the shift lever is moved to select another shift state with park (P) selected, the ignition switch on (READY) and all doors closed. On or Off Main body ECU (Multiplex network body ECU)
Auto unlock by shift to P Off Function that unlocks all of the doors when the P position switch (shift position indicator) is pushed with a shift state other than park (P) selected and the ignition switch on (READY). On or Off Main body ECU (Multiplex network body ECU)
Auto unlock by driver door On*
Off*
Function that unlocks the other doors when the driver door is opened within approximately 45 seconds of the ignition switch being turned off. On or Off Main body ECU (Multiplex network body ECU)

*: The default setting differs depending on the country.