1.INSPECT AIR CONDITIONER RELAY
| *a | Component without harness connected
(Air Conditioner Relay) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 5 | Battery voltage is not applied between terminals 1 and 2 | 10 kΩ or higher |
| 3 - 5 | Battery voltage is applied between terminals 1 and 2 | Below 1 Ω |
If the result is not as specified, replace the air conditioner relay.