Home › Vehicle Exterior › DOOR / HATCH › HOOD SUPPORT
RM37H0E _59 Vehicle Exterior _095314 DOOR / HATCH _0452983 HOOD SUPPORT N

DOOR / HATCH  HOOD SUPPORT  DISPOSAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the RH and LH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 53440D 1.DISPOSE OF HOOD SUPPORT ASSEMBLY

NOTICE:

Make sure the piston rods are in the fully extended stake before performing work.


a.

Secure the hood support assembly horizontally in a vise with the piston rod pulled out.


b.
B127037C09
1.906,1.385 2.063,1.583 0.156,0.198 10 false A 2.948,1.385 3.104,1.583 0.156,0.198 10 false B

Wearing safety glasses, gradually cut a part between A and B shown in the illustration to discharge the gas inside.

Area Measurement
A - B 150 mm (5.906 in.)

CAUTION:
C320205

Always use proper safety equipment and be careful when drilling because shards of metal may fly about.


HINT:

The gas is colorless, odorless and non-poisonous.