Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
64530A
1.DISPOSE OF LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY
Fully extend the luggage compartment door support assembly.
Secure the luggage compartment door support assembly horizontally in a vise with the piston rod pulled out.
Wearing protective glass, gradually cut the shaded part between "A" and "B" shown the illustration using a metal saw to gradually release the gas.
| Area | Measurement |
|---|---|
| A - B | 10 mm (0.394 in.) |
Always use proper safety equipment and be careful when drilling because shards of metal way fly about.
The gas is colorless, odorless and non-poisonous.