| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | CUT KEY | 69503B | - | - | - |
| 2 | TRANSMITTER HOUSING COVER | - | - | - | - |
| 3 | TRANSMITTER BATTERY | 89745C | - | - | - |
| *1 | TRANSMITTER HOUSING CASE | - | - |
69503B
1.REMOVE CUT KEY
| *a | Release Hook Knob | - | - |
Slide the release hook knob to remove the cut key.
2.REMOVE TRANSMITTER HOUSING COVER
Using a screwdriver with its tip wrapped in protective tape, pry apart the transmitter housing cover.
89745C
3.REMOVE TRANSMITTER BATTERY
Using a screwdriver with its tip wrapped in protective tape, remove the transmitter battery.
Do not push the terminals with your finger.
Do not forcibly pry up the transmitter battery as the terminals may be damaged.
Do not touch the transmitter battery with wet hands. Moisture may cause rust.
Do not touch or move any components inside the transmitter housing case. It may interfere with proper operation.
When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical key transmitter sub-assembly from being damaged.