| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | TRANSMITTER BATTERY | 89745C | - | - | - |
| 2 | TRANSMITTER HOUSING COVER | - | - | - | - |
| 3 | INSPECT TRANSMITTER LED ILLUMINATION | - | - | - | - |
| 4 | CUT KEY | 69503B | - | - | - |
| *1 | TRANSMITTER HOUSING CASE | - | - |
89745C
1.INSTALL TRANSMITTER BATTERY
Do not push the terminals with your finger.
Do not forcibly pry up the transmitter battery as the terminals may be damaged.
Do not touch the transmitter battery with wet hands. Moisture may cause rust.
Do not touch or move any components inside the transmitter housing case. It may interfere with proper operation.
When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical key transmitter sub-assembly from being damaged.
2.INSTALL TRANSMITTER HOUSING COVER
3.INSPECT TRANSMITTER LED ILLUMINATION
| *a | LED | - | - |
Press one of the transmitter switches and check that the LED illuminates.
Transmitter LED illuminates when a switch is pressed.
69503B
4.INSTALL CUT KEY