| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| U0142 | Lost Communication with Main Body ECU | No communication with main body ECU (multiplex network body ECU) and front multiplex network door ECU | ·
CAN communication system ·
Main body ECU (multiplex network body ECU) ·
Front multiplex network door ECU LH |
Front Left Door | B |
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| U0142 | Lost Communication with Main Body ECU | No communication with main body ECU (multiplex network body ECU) and front multiplex network door ECU | ·
CAN communication system ·
Main body ECU (multiplex network body ECU) ·
Front multiplex network door ECU RH |
Front Right Door | B |
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
NEXT
Check for DTCs.
| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| DTCs are output | B |
A
B
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
Check for DTCs.
| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| DTCs are output | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING