55900
1.INSPECT AIR CONDITIONING CONTROL ASSEMBLY (w/ Navigation System)
Check the illumination.
| *a | Component without harness connected
(Air Conditioning Control Assembly) |
Apply auxiliary battery voltage to the air conditioning control assembly and check the illumination.
| Tester Connection | Specified Condition |
|---|---|
|
Click Location & Routing(D90)Location & Routingewd_type=routing;type=c;code=D90 Click Connector(D90)Instrument Panel>Instrument Panel Wire>Air Conditioning Control Assemblyewd_type=component;type=c;code=D90;pinno=5,10 |
|
| Auxiliary battery positive (+) → D90-5 (ILL+)
Auxiliary battery negative (-) → D90-10 (ILL-) |
Illuminates |
If the result is not as specified, replace the air conditioning control assembly.
55900
2.INSPECT AIR CONDITIONING CONTROL ASSEMBLY (w/o Navigation System)
Check the illumination.
| *a | Component without harness connected
(Air Conditioning Control Assembly) |
Apply auxiliary battery voltage to the air conditioning control assembly and check the illumination.
| Tester Connection | Specified Condition |
|---|---|
|
Click Location & Routing(D91)Location & Routingewd_type=routing;type=c;code=D91 Click Connector(D91)Instrument Panel>Instrument Panel Wire>Air Conditioning Control Assemblyewd_type=component;type=c;code=D91;pinno=4,5 |
|
| Auxiliary battery positive (+) → D91-4 (ILL+)
Auxiliary battery negative (-) → D91-5 (ILL-) |
Illuminates |
If the result is not as specified, replace the air conditioning control assembly.