This DTC is stored when the rain sensor detects an internal malfunction.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Memory | DTC Output from | Priority |
|---|---|---|---|---|---|---|
| B1400 | Rain Sensor Malfunction | When one of the following conditions is met:
·
IG voltage is 9.5 V or higher and rain sensor internal thermistor temperature malfunction continues for 10 seconds or more ·
IG voltage is 9.5 V or higher and LED output malfunction continues for 2 seconds or more |
Rain sensor | ○ | Rain and/or Humidity Sensor | A |
Pre-procedure1
None.
Procedure1
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
Post-procedure1
Turn the ignition switch to ON and wait for at least 10 seconds.
NEXT
Check for DTCs.
| Result | Proceed to |
|---|---|
| B1400 is not output | A |
| B1400 is output | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B