DATA LIST
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Trunk Lock Position | Luggage compartment door lock assembly lock position signal | Lock or Unlock | Lock: Luggage compartment door lock assembly locked
Unlock: Luggage compartment door lock assembly unlocked |
- |
| Trunk/BDoor Open SW | Luggage door opening switch assembly signal | OFF or ON | OFF: Luggage door opening switch assembly signal off
ON: Luggage door opening switch assembly signal on |
- |
| Trunk Main SW | Luggage door opening cancel switch assembly signal | OFF or ON | OFF: Luggage door opening cancel switch assembly off
ON: Luggage door opening cancel switch assembly on |
- |
| Luggage Courtesy SW | Luggage door courtesy light switch signal | OFF or ON | OFF: Luggage door closed
ON: Luggage door open |
- |
| Trunk Link with Door Lock | Function that opens the luggage compartment door when the electrical key transmitter sub-assembly is not being carried and the luggage electrical key switch is pressed and all doors are unlocked using the entry door lock function, wireless door lock function, mechanical key or door control switch. | OFF or ON | Customized value displayed | - |
ACTIVE TEST
Using the GTS, perform the Active Tests allows relays, VSVs and actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Trunk and Back-Door Open | Luggage door condition signal | OFF or ON | - |