DATA LIST
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
According to the display on the GTS, read the "Data List".
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Fuel Lid Interlock Switch | Fuel lid interlock switch condition | OFF/ON | OFF: Fuel lid fully closed
ON: Fuel lid open |
- |
| Fuel Lid Open Switch | Fuel lid opener switch status | OFF/ON | OFF: Fuel lid opener switch not pushed
ON: Fuel lid opener switch pushed |
- |