ASC SYSTEM
The ASC system uses a stereo component equalizer assembly to electronically generate a driving sound. Simulated EV sounds are output from No. 2 speaker assembly with box and No. 3 speaker assembly with box.
The simulated EV sounds are calculated based on the vehicle information (driving mode, shift position and accelerator opening angle). The sounds can be turned on and off via operation of the ASC switch (vehicle sound switch).
The following sounds can be output.
Driving Sound
When the vehicle is being driven, a sound resembling an audible EV sound (including sounds made when shifting gears) is output.
When the vehicle is accelerating at 10 km/h (6 mph) or more, sound is output.
| Item | Condition | Remark | |
|---|---|---|---|
| Drive mode | Normal | Sport | - |
| Shift lever position | R, D, Br | - | |
| Vehicle speed | When accelerating: 10 km/h (6 mph) or more | When the vehicle is determined to be driving at the speeds listed, the driving sound is output. | |
SID Sound
When ignition switch is to ON, the ASC switch (vehicle sound switch) is turned on and the drive mode select switch (pattern select switch assembly) is changed to Eco, Normal or Sport, a SID sound sounds.
ASC ON Sound
When the ignition switch is turned to ON and the ASC switch (vehicle sound switch) is turned on, an ASC ON sound sounds.