INSPECT ASC SYSTEM OPERATION
Check for safety before performing any tests.
When the drive mode changes to a mode other than Normal or Sport, the simulated EV sound stops.
Driving sound inspection
Turn the ignition switch to ON.
Turn the ASC switch (vehicle sound assembly) on.
Select the Normal or Sport drive mode.
Change the shift position to D, Br or R and check that a simulated driving sound synchronized with the driving condition sounds while driving at a vehicle speed exceeding 10 km/h (6 mph).
Check that the sound changes when the driving mode is changed among Normal (operation condition) and Sport (operation condition).
SID sound inspection
Turn the ignition switch to ON.
Turn the ASC switch (vehicle sound assembly) on.
After selecting the driving mode to Eco, Normal or Sport with the vehicle stopped, check that a SID sound sounds.
ASC ON sound inspection
Turn the ignition switch to ON.
Turn the ASC switch (vehicle sound assembly) on.
After turning the ASC switch (vehicle sound switch) on with the vehicle stopped, check that an ASC ON sound sounds.