| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| U0125 | Lost Communication with Multi-axis Acceleration Sensor Module | No communication with airbag ECU assembly | ·
CAN communication system ·
Airbag ECU Assembly ·
Stereo component equalizer assembly |
ASC | B |
| U0129 | Lost Communication with Brake System Control Module | No communication with skid control ECU (brake master cylinder assembly) | ·
CAN communication system ·
Brake actuator assembly ·
Stereo component equalizer assembly |
ASC | B |
| U0142 | Lost Communication with Body Control Module "B" | No communication with main body ECU (multiplex network body ECU) | ·
CAN communication system ·
Main body ECU (multiplex network body ECU) ·
Stereo component equalizer assembly |
ASC | B |
| U0293 | Lost Communication With Hybrid Powertrain Control Module | No communication with EV control ECU | ·
CAN communication system ·
EV control ECU ·
Stereo component equalizer assembly |
ASC | B |
Pre-procedure1
Clear the DTCs.
Procedure1
Recheck for DTCs and check that no DTCs are output.
| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| DTCs are output | B |
Post-procedure1
None
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING