| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
| U0073 | Control Module Communication Bus "A" Off | CAN bus connection error | CAN communication system | D-SEAT SW | B |
| U0140 | Lost Communication with Body Control Module | CAN reception error | CAN communication system | D-SEAT SW | B |
| U0155 | Lost Communication with Instrument Panel Cluster (IPC) Control Module | CAN reception error | CAN communication system | D-SEAT SW | B |
| U0163 | Lost Communication with Navigation Control Module | CAN reception error | CAN communication system | D-SEAT SW | B |
| U0164 | Lost Communication with HVAC Control Module | CAN reception error | CAN communication system | D-SEAT SW | B |
| U0293 | Lost Communication with Hybrid/EV Powertrain Control Module | CAN reception error | CAN communication system | D-SEAT SW | B |
| U113E | Lost Communication with DC Quick Charging Control Module | CAN reception error | CAN communication system | D-SEAT SW | B |
Pre-procedure1
Clear the DTCs.
Procedure1
Recheck for DTCs and check if the same DTC is output again.
| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| DTCs are output | B |
Post-procedure1
None
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING