CUSTOMIZE ROOF SUNSHADE SYSTEM
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make notes of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
The following item can be customized.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Front SW Auto Operation | This function is used to enable or disable the auto operation. | ON | 0:OFF,1:ON | Sliding roof drive gear sub-assembly |