Home › ADAS / AD › ADVANCED PARK › RELAY
RM37H0E _95 ADAS / AD _095318 ADVANCED PARK _0454694 RELAY G

ADVANCED PARK  RELAY  INSPECTION  


PROCEDURE

Hide 85912S 1.INSPECT IR RELAY

a.
E209082

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Auxiliary battery voltage is not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Auxiliary battery voltage is applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the IR relay.