72020
1.INSPECT FRONT SEAT ADJUSTER ASSEMBLY LH (for LHD)
Check that the seat cushion moves smoothly when the auxiliary battery is connected to the slide motor connector terminals.
| *a | Component without harness connected
(Slide Motor (Front Seat Adjuster Assembly LH)) |
w/ Memory:
| Tester Connection | Operational Direction |
|---|---|
|
Click Location & Routing(L26)Location & Routingewd_type=routing;type=c;code=L26 |
|
| L26-4 - Auxiliary battery positive (+)
L26-1 - Auxiliary battery negative (-) |
Forward |
| L26-1 - Auxiliary battery positive (+)
L26-4 - Auxiliary battery negative (-) |
Backward |
If the result is not as specified, replace the front seat adjuster assembly LH.
| *a | Component without harness connected
(Slide Motor (Front Seat Adjuster Assembly LH)) |
w/o Memory:
| Tester Connection | Operational Direction |
|---|---|
|
Click Location & Routing(L29)Location & Routingewd_type=routing;type=c;code=L29 |
|
| L29-2 - Auxiliary battery positive (+)
L29-1 - Auxiliary battery negative (-) |
Forward |
| L29-1 - Auxiliary battery positive (+)
L29-2 - Auxiliary battery negative (-) |
Backward |
If the result is not as specified, replace the front seat adjuster assembly LH.
72020
2.INSPECT FRONT SEAT ADJUSTER ASSEMBLY LH (for RHD)
| *a | Component without harness connected
(Slide Motor (Front Seat Adjuster Assembly LH)) |
Check that the seat cushion moves smoothly when the auxiliary battery is connected to the slide motor connector terminals.
| Tester Connection | Operational Direction |
|---|---|
|
Click Location & Routing(L29)Location & Routingewd_type=routing;type=c;code=L29 |
|
| L29-2 - Auxiliary battery positive (+)
L29-1 - Auxiliary battery negative (-) |
Forward |
| L29-1 - Auxiliary battery positive (+)
L29-2 - Auxiliary battery negative (-) |
Backward |
If the result is not as specified, replace the front seat adjuster assembly LH.
71014S
3.INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY LH (for LHD)
Check that the seatback moves smoothly when the auxiliary battery is connected to the reclining motor connector terminals.
| *a | Component without harness connected
(Reclining Motor (Front Seatback Frame Sub-assembly LH)) |
w/ Memory:
| Tester Connection | Operational Direction |
|---|---|
|
Click Location & Routing(L55)Location & Routingewd_type=routing;type=c;code=L55 |
|
| L55-4 - Auxiliary battery positive (+)
L55-1 - Auxiliary battery negative (-) |
Forward |
| L55-1 - Auxiliary battery positive (+)
L55-4 - Auxiliary battery negative (-) |
Backward |
If the result is not as specified, replace the front seatback frame sub-assembly LH.
| *a | Component without harness connected
(Reclining Motor (Front Seatback Frame Sub-assembly LH)) |
w/o Memory:
| Tester Connection | Operational Direction |
|---|---|
|
Click Location & Routing(L54)Location & Routingewd_type=routing;type=c;code=L54 |
|
| L54-2 - Auxiliary battery positive (+)
L54-1 - Auxiliary battery negative (-) |
Forward |
| L54-1 - Auxiliary battery positive (+)
L54-2 - Auxiliary battery negative (-) |
Backward |
If the result is not as specified, replace the front seatback frame sub-assembly LH.
71014S
4.INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY LH (for RHD)
| *a | Component without harness connected
(Reclining Motor (Front Seatback Frame Sub-assembly LH)) |
Check that the seatback moves smoothly when the auxiliary battery is connected to the reclining motor connector terminals.
| Tester Connection | Operational Direction |
|---|---|
|
Click Location & Routing(L54)Location & Routingewd_type=routing;type=c;code=L54 |
|
| L54-2 - Auxiliary battery positive (+)
L54-1 - Auxiliary battery negative (-) |
Forward |
| L54-1 - Auxiliary battery positive (+)
L54-2 - Auxiliary battery negative (-) |
Backward |
If the result is not as specified, replace the front seatback frame sub-assembly LH.
72010
5.INSPECT FRONT SEAT ADJUSTER ASSEMBLY RH (for LHD)
| *a | Component without harness connected
(Slide Motor (Front Seat Adjuster Assembly RH)) |
Check that the seat cushion moves smoothly when the auxiliary battery is connected to the slide motor connector terminals.
| Tester Connection | Operational Direction |
|---|---|
|
Click Location & Routing(L4)Location & Routingewd_type=routing;type=c;code=L4 |
|
| L4-2 - Auxiliary battery positive (+)
L4-1 - Auxiliary battery negative (-) |
Forward |
| L4-1 - Auxiliary battery positive (+)
L4-2 - Auxiliary battery negative (-) |
Backward |
If the result is not as specified, replace the front seat adjuster assembly RH.
72010
6.INSPECT FRONT SEAT ADJUSTER ASSEMBLY RH (for RHD)
Check that the seat cushion moves smoothly when the auxiliary battery is connected to the slide motor connector terminals.
| *a | Component without harness connected
(Slide Motor (Front Seat Adjuster Assembly RH)) |
w/ Memory:
| Tester Connection | Operational Direction |
|---|---|
|
Click Location & Routing(L1)Location & Routingewd_type=routing;type=c;code=L1 |
|
| L1-4 - Auxiliary battery positive (+)
L1-1 - Auxiliary battery negative (-) |
Forward |
| L1-1 - Auxiliary battery positive (+)
L1-4 - Auxiliary battery negative (-) |
Backward |
If the result is not as specified, replace the front seat adjuster assembly RH.
| *a | Component without harness connected
(Slide Motor (Front Seat Adjuster Assembly RH)) |
w/o Memory:
| Tester Connection | Operational Direction |
|---|---|
|
Click Location & Routing(L4)Location & Routingewd_type=routing;type=c;code=L4 |
|
| L4-2 - Auxiliary battery positive (+)
L4-1 - Auxiliary battery negative (-) |
Forward |
| L4-1 - Auxiliary battery positive (+)
L4-2 - Auxiliary battery negative (-) |
Backward |
If the result is not as specified, replace the front seat adjuster assembly RH.
71013S
7.INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY RH (for LHD)
| *a | Component without harness connected
(Reclining Motor (Front Seatback Frame Sub-assembly RH)) |
Check that the seatback moves smoothly when the auxiliary battery is connected to the reclining motor connector terminals.
| Tester Connection | Operational Direction |
|---|---|
|
Click Location & Routing(L48)Location & Routingewd_type=routing;type=c;code=L48 |
|
| L48-2 - Auxiliary battery positive (+)
L48-1 - Auxiliary battery negative (-) |
Forward |
| L48-1 - Auxiliary battery positive (+)
L48-2 - Auxiliary battery negative (-) |
Backward |
If the result is not as specified, replace the front seatback frame sub-assembly RH.
71013S
8.INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY RH (for RHD)
Check that the seatback moves smoothly when the auxiliary battery is connected to the reclining motor connector terminals.
| *a | Component without harness connected
(Reclining Motor (Front Seatback Frame Sub-assembly RH)) |
w/ Memory:
| Tester Connection | Operational Direction |
|---|---|
|
Click Location & Routing(L49)Location & Routingewd_type=routing;type=c;code=L49 |
|
| L49-4 - Auxiliary battery positive (+)
L49-1 - Auxiliary battery negative (-) |
Forward |
| L49-1 - Auxiliary battery positive (+)
L49-4 - Auxiliary battery negative (-) |
Backward |
If the result is not as specified, replace the front seatback frame sub-assembly RH.
| *a | Component without harness connected
(Reclining Motor (Front Seatback Frame Sub-assembly RH)) |
w/o Memory:
| Tester Connection | Operational Direction |
|---|---|
|
Click Location & Routing(L48)Location & Routingewd_type=routing;type=c;code=L48 |
|
| L48-2 - Auxiliary battery positive (+)
L48-1 - Auxiliary battery negative (-) |
Forward |
| L48-1 - Auxiliary battery positive (+)
L48-2 - Auxiliary battery negative (-) |
Backward |
If the result is not as specified, replace the front seatback frame sub-assembly RH.