72760D
1.INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (for LHD)
Check the operation of the lumbar support adjuster assembly LH.
| *a | Component without harness connected
(Lumbar Support Adjuster Assembly LH) |
Check that the lumbar support adjuster assembly LH moves forward and backward smoothly when the auxiliary battery is connected to the lumbar support adjuster assembly LH connector terminals.
| Tester Connection | Operational Direction |
|---|---|
|
Click Location & Routing(L57)Location & Routingewd_type=routing;type=c;code=L57 |
|
| L57-1 - Auxiliary battery positive (+)
L57-2 - Auxiliary battery negative (-) |
forward |
| L57-2 - Auxiliary battery positive (+)
L57-1 - Auxiliary battery negative (-) |
backward |
If the result is not as specified, replace the lumbar support adjuster assembly LH.
72750D
2.INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY RH (for RHD)
Check the operation of the lumbar support adjuster assembly RH.
| *a | Component without harness connected
(Lumbar Support Adjuster Assembly RH) |
Check that the lumbar support adjuster assembly RH moves forward and backward smoothly when the auxiliary battery is connected to the lumbar support adjuster assembly RH connector terminals.
| Tester Connection | Operational Direction |
|---|---|
|
Click Location & Routing(L50)Location & Routingewd_type=routing;type=c;code=L50 |
|
| L50-1 - Auxiliary battery positive (+)
L50-2 - Auxiliary battery negative (-) |
forward |
| L50-2 - Auxiliary battery positive (+)
L50-1 - Auxiliary battery negative (-) |
backward |
If the result is not as specified, replace the lumbar support adjuster assembly RH.