81260
1.INSPECT GLOVE BOX LIGHT ASSEMBLY
| *a | Component without harness connected
(Glove box light assembly) |
Check the illumination.
Apply auxiliary battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
|
Click Location & Routing(D8)Location & Routingewd_type=routing;type=c;code=D8 Click Connector(D8)Instrument Panel>Instrument Panel Wire>Glove Box Light Assemblyewd_type=component;type=c;code=D8;pinno=2,1 |
|
| D8-2 (B) - Auxiliary battery positive (+)
D8-1 (L) - Auxiliary battery negative (-) |
Glove box light assembly illuminates |
If the result is not as specified, replace the glove box light assembly.