Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM
RM37H0E _56 Audio / Visual / Telematics _095261 NAVIGATION / MULTI INFO DISPLAY _0453794 NAVIGATION SYSTEM C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  C1610  Camera ECU Malfunction  


DESCRIPTION

This DTC is stored when a malfunction occurs in the panoramic view monitor system*1 or parking assist monitor system*2.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
C1610 Camera ECU Malfunction Malfunction occurs in the panoramic view monitor system*1
Malfunction occurs in the parking assist monitor system*2
·

Panoramic view monitor system*1

·

Parking assist monitor system*2

·

Radio receiver assembly


Navigation System B

*1: w/ Panoramic View Monitor System

*2: w/ Parking Assist Monitor System


CAUTION / NOTICE / HINT

NOTICE:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>PRECAUTION


PROCEDURE

1.CHECK MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
w/ Panoramic View Monitor System A
w/ Parking Assist Monitor System B



A

2.CHECK DTC (PANORAMIC VIEW MONITOR SYSTEM)

B

3.CHECK DTC (PARKING ASSIST MONITOR SYSTEM)
2.CHECK DTC (PANORAMIC VIEW MONITOR SYSTEM)

Pre-procedure1

a.

Clear the DTCs.

Chassis > Circumference Monitoring Camera Control Module > Clear DTCs
50002 470

Procedure1

b.

Recheck for DTCs and check that no DTCs are output.

Chassis > Circumference Monitoring Camera Control Module > Trouble Codes
50001 470
Result:
Result Proceed to
DTCs are not output A
DTCs are output B



Post-procedure1

c.

None



A

4.CHECK DTC (NAVIGATION SYSTEM)

B

3.CHECK DTC (PARKING ASSIST MONITOR SYSTEM)

Pre-procedure1

a.

Clear the DTCs.

Chassis > Rear Camera > Clear DTCs
50002 85

Procedure1

b.

Recheck for DTCs and check that no DTCs are output.

Chassis > Rear Camera > Trouble Codes
50001 85
Result:
Result Proceed to
DTCs are not output A
DTCs are output B



Post-procedure1

c.

None



A

4.CHECK DTC (NAVIGATION SYSTEM)

B

4.CHECK DTC (NAVIGATION SYSTEM)

Pre-procedure1

a.

Clear the DTCs.

Body Electrical > Navigation System > Clear DTCs
50002 212

Procedure1

b.

Recheck for DTCs and check that no DTCs are output.

Body Electrical > Navigation System > Trouble Codes
50001 212
Result:
Result Proceed to
DTCs are not output A
DTCs are output B



Post-procedure1

c.

None



A

END

B

REPLACE RADIO RECEIVER ASSEMBLY