Home › Steering › STEERING COLUMN › POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
RM37H0E _55 Steering _095770 STEERING COLUMN _0454949 POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM C

STEERING COLUMN  POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM  U014287  Lost Communication with Body Control Module "B" Missing Message  U020887  Lost Communication with "Seat Control Module A" Missing Message  


DESCRIPTION

The multiplex tilt and telescopic ECU receives signals from the main body ECU (multiplex network body ECU) and position control ECU assembly (driver seat)* via CAN communication.

*: w/ Seat Memory

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
U014287 Lost Communication with Body Control Module "B" Missing Message One of the following conditions is met:
·

Signals (memory-related data) from the main body ECU (multiplex network body ECU) are interrupted for 3.3 seconds.

·

Signals (IG switch signals) from the main body ECU (multiplex network body ECU) are interrupted for 10 seconds or more.


·

CAN communication system

·

Main body ECU (Multiplex network body ECU)


Tilt&Telescopic B
U020887 Lost Communication with "Seat Control Module A" Missing Message Signals (memory or recall request signal) received from the position control ECU assembly (driver seat) are interrupted for 10 seconds or more.
·

CAN communication system

·

Position control ECU assembly (Driver seat)*


Tilt&Telescopic B

*: w/ Seat Memory

PROCEDURE

1.GO TO CAN COMMUNICATION SYSTEM

Result:
Proceed to
NEXT



NEXT

END