CUSTOMIZE METER / GAUGE SYSTEM
Customizing with the GTS.
Select the setting by referring to the table below.
Be sure to record the current value before customizing.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Lane Change Flashing Times Adjust | Function to change the lane change flashing time | 3 | $00:OFF,$01:3,$02:4,$03:5,$04:6,$05:7 | Combination meter assembly |
| Flasher Sound Volume Adjust | Function to change the flasher sound volume | Medium | $02:Large,$00:Medium,$01:Small | Combination meter assembly |
| Reverse Buzzer Setting | Function to change the reverse buzzer setting | Single | $00:Continual,$01:Single | Combination meter assembly |
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| ODO Display Time After IG OFF Adjust | Function to change the ODO display time after the ignition switch is turned off | 30s | $00:30s,$01:60s,$02:600s,$03:OFF | Combination meter assembly |
Customizing with the multi-information display
Select the settings tab on the multi-information display and set the customize settings.
| Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
|
*: Available languages may differ depending on the target region. |
||||
| Language | Function to change the language on the display | English | English* | Combination meter assembly |
| Units | Function to change the units on the display | miles(kg/100 km) | ·
km(kg/100 km) ·
miles(kg/100 km) |
Combination meter assembly |
| Eco-friendly driving information tab | FC system indicator eco acceleration guidance display setting | ON | ON/OFF | Combination meter assembly |
| Displayed fuel economy display item setting | Total Average | Trip Average/Total Average/Tank Average | Combination meter assembly | |
| Audio tab | Function to change the audio tab on the display | ON | ON/OFF | Combination meter assembly |
| Vehicle information tab | Function to change the energy monitor on the display | ON | ON/OFF | Combination meter assembly |
| Function to change the drive info. type on the display | Trip | Trip/Total | Combination meter assembly | |
| Function to change the drive info. items on the display | ·
Distance (The upper section) ·
Total Time (The lower berth) |
Average Speed/Distance/Total Time | Combination meter assembly | |
| Trip Summary | Function to change the trip summary on the display | Drive Info | Drive Info/Eco Score | Combination meter assembly |
| Pop-Up Display | Function to change the TbT navigation on the display | ON | ON/OFF | Combination meter assembly |
| Function to change the telephone on the display | ON | ON/OFF | Combination meter assembly | |
| Function to change the audio operation on the display | ON | ON/OFF | Combination meter assembly | |
| Function to change the volume operation on the display | ON | ON/OFF | Combination meter assembly | |
| Function to change the voice control on the display | ON | ON/OFF | Combination meter assembly | |
| Function to change the brightness on the display | ON | ON/OFF | Combination meter assembly | |
| Function to change the V2V advisory on the display | OFF | ON/OFF | Combination meter assembly | |
| Multi-information display OFF | Function to change the Multi-information display off setting on the display | - | - | Combination meter assembly |
| Default Settings | Reset the combination meter settings to the default setting | - | YES or NO | Combination meter assembly |