U010387: The meter mirror sub-assembly receives signals from the shift control ECU via CAN communication.
U012987: The meter mirror sub-assembly receives signals from the brake actuator assembly (No.2 skid control ECU) via CAN communication.
U014287: The meter mirror sub-assembly receives signals from the main body ECU (multiplex network body ECU) via CAN communication.
U015587: The meter mirror sub-assembly receives signals from the combination meter assembly via CAN communication.
U016387: The meter mirror sub-assembly receives signals from the radio receiver assembly via CAN communication.
U023A87: The meter mirror sub-assembly receives signals from the object recognition camera*1 or forward recognition camera*2 via CAN communication.
U029387: The meter mirror sub-assembly receives signals from the EV control ECU via CAN communication.
U110487: The meter mirror sub-assembly receives signals from the driving support ECU assembly via CAN communication.*1
U113787: The meter mirror sub-assembly receives signals from the intelligent transport systems communication ECU via CAN communication.
*1: w/ Pre-collision System (for Stereo Camera Type)
*2: w/ Pre-collision System (for Mono Camera Type)
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Memory | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|---|
| U010387 | Lost Communication with Gear Shift Control Module "A" (Hybrid/EV Battery Local Bus) Missing Message | ·
DTC Detection Condition: IG+ voltage 9.5 to 11.5 V or higher ·
Malfunction Status: Lost communication with shift control ECU ·
Malfunction Duration: 5 seconds or more |
·
Shift control ECU ·
CAN communication system ·
Meter mirror sub-assembly |
DTC stored | Head Up Display | B | - |
| U012987 | Lost Communication With Brake System Control Module Missing Message | ·
DTC Detection Condition: IG+ voltage 9.5 to 11.5 V or higher ·
Malfunction Status: Lost communication with brake actuator assembly (No.2 skid control ECU) ·
Malfunction Duration: 3.6 seconds or more |
·
Brake actuator assembly (No.2 skid control ECU) ·
CAN communication system ·
Meter mirror sub-assembly |
DTC stored | Head Up Display | B | - |
| U014287 | Lost Communication with Body Control Module "B" Missing Message | ·
DTC Detection Condition: IG+ voltage 9.5 to 11.5 V or higher ·
Malfunction Status: Lost communication with main body ECU (multiplex network body ECU) ·
Malfunction Duration: 5 seconds or more |
·
Main body ECU (multiplex network body ECU) ·
CAN communication system ·
Meter mirror sub-assembly |
DTC stored | Head Up Display | B | - |
| U015587 | Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message | ·
DTC Detection Condition: IG+ voltage 9.5 to 11.5 V or higher ·
Malfunction Status: Lost communication with combination meter assembly ·
Malfunction Duration: 5 seconds or more |
·
Combination meter assembly ·
CAN communication system ·
Meter mirror sub-assembly |
DTC stored | Head Up Display | B | - |
| U016387 | Lost Communication with Navigation Control Module Missing Message | ·
DTC Detection Condition: IG+ voltage 9.5 to 11.5 V or higher ·
Malfunction Status: Lost communication with radio receiver assembly ·
Malfunction Duration: 5 seconds or more |
·
Radio receiver assembly ·
CAN communication system ·
Meter mirror sub-assembly |
DTC stored | Head Up Display | B | - |
| U023A87 | Lost Communication with Image Processing Module "A" Missing Message | ·
DTC Detection Condition: IG+ voltage 9.5 to 11.5 V or higher ·
Malfunction Status: Lost communication with object recognition camera (w/ Pre-collision System (for Stereo Camera Type)) or forward recognition camera (w/ Pre-collision System (for Mono Camera Type)) ·
Malfunction Duration: 5 seconds or more |
·
Forward recognition camera (w/ Pre-collision System (for Mono Camera Type)) ·
Object recognition camera (w/ Pre-collision System (for Stereo Camera Type) ·
CAN communication system ·
Meter mirror sub-assembly |
DTC stored | Head Up Display | B | - |
| U029387 | Lost Communication with Hybrid/EV Powertrain Control Module Missing | ·
DTC Detection Condition: IG+ voltage 9.5 to 11.5 V or higher ·
Malfunction Status: Lost communication with EV control ECU assembly ·
Malfunction Duration: 3.6 seconds or more |
·
EV control ECU ·
CAN communication system ·
Meter mirror sub-assembly |
DTC stored | Head Up Display | B | - |
| U110487 | Lost Communication with Driving Support ECU Missing Message | ·
DTC Detection Condition: IG+ voltage 9.5 to 11.5 V or higher ·
Malfunction Status: Lost communication with driving support ECU assembly ·
Malfunction Duration: 5 seconds or more |
·
Driving support ECU assembly ·
CAN communication system ·
Meter mirror sub-assembly |
DTC stored | Head Up Display | B | w/ Pre-collision System (for Stereo Camera Type) |
| U113787 | Lost Communication with ITS Connect Module Missing Message | ·
DTC Detection Condition: IG+ voltage 9.5 to 11.5 V or higher ·
Malfunction Status: Lost communication with intelligent transport systems communication ECU ·
Malfunction Duration: 3.6 seconds or more |
·
Intelligent transport systems communication ECU ·
CAN communication system ·
Meter mirror sub-assembly |
DTC stored | Head Up Display | B | - |
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
NEXT
Check if CAN communication DTCs are output.
If CAN communication system malfunction DTCs are output, they may also be output for other systems.
If the CAN communication system has been inspected and repaired in other systems, the DTC will not be output when rechecking for DTCs.
If the DTC is output frequently, duplicate the conditions that cause the problem symptoms and perform the check again, even though the DTC was not output when rechecking for DTCs.
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
| Result | Proceed to |
|---|---|
| CAN communication system DTCs is not output. | A |
| CAN communication system DTCs is output. | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING