Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM
RM37H0E _58 Vehicle Interior _095297 SEAT BELT _0455415 SEAT BELT WARNING SYSTEM W

SEAT BELT  SEAT BELT WARNING SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE SEAT BELT WARNING SYSTEM


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.

·

These buzzers should be on for safe driving. Perform this procedure only if it is necessary to set the buzzer to off (disabled).



a.

Customizing with the GTS

i.

Select the setting by referring to the table below.

Warning
Tester Display Description Default Setting ECU
Driver Seatbelt Warning Buzzer Function Enables sounding of the driver seat belt warning buzzer ON $00:OFF,$01:ON Combination meter assembly
Passenger Seatbelt Warning Buzzer Function Enables sounding of the front passenger seat belt warning buzzer ON $00:OFF,$01:ON Combination meter assembly
Rear Right Seatbelt Warning Buzzer Function Function to sound the rear RH seat belt warning buzzer ON $00:OFF,$01:ON Combination meter assembly
Rear Left Seatbelt Warning Buzzer Function Function to sound the rear LH seat belt warning buzzer ON $00:OFF,$01:ON Combination meter assembly
Rear Center Seatbelt Warning Buzzer Function Function to sound the rear center seat belt warning buzzer ON $00:OFF,$01:ON Combination meter assembly
50006 7
HINT:

These settings are only valid when the vehicle is driven at approximately 20 km/h (12 mph) or more.