SEAT BELT WARNING SYSTEM DESCRIPTION
Seat belt warning light operation for driver seat belt:
The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the driver seat belt state, vehicle speed, shift state position and parking brake state.
Seat belt warning light operation for front passenger seat belt:
The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with whether the front passenger seat is occupied, the front passenger seat belt state, vehicle speed, shift state position and parking brake state.
Rear seat belt warning light:
The rear seat belt warning light on the combination meter illuminates, blinks or turns off in accordance with the rear seat is occupied, vehicle speed and rear seat belt state.
Front seat belt warning buzzer: (w/ Buzzer Regulated by Law)
After turning the ignition switch ON, if the driver seat belt is not fastened within 1.8 seconds, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 6 seconds.
When the vehicle is driven at approximately 20 km/h (12 mph) or more with the front passenger seat occupied and the driver or front passenger seat belt not fastened, the seat belt warning buzzer in the combination meter assembly will sound once.
When 24 seconds have passed after the buzzer sounded, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 6 seconds.
After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 90 seconds.
Rear seat belt warning buzzer: (w/ Buzzer Regulated by Law)
When the vehicle is driven at approximately 20 km/h (12 mph) or more with a rear seat belt not fastened not fastened, the seat belt warning buzzer in the combination meter assembly will sound once.
When 24 seconds have passed after the buzzer sounded, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 6 seconds.
After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 30 seconds.
Front seat belt warning buzzer: (w/o Buzzer Regulated by Law)
When the vehicle is driven at approximately 20 km/h (12 mph) or more with the front passenger seat occupied and the driver or front passenger seat belt not fastened, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 24 seconds.
After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 100 seconds.
Rear seat belt warning buzzer: (w/o Buzzer Regulated by Law)
When the vehicle is driven at approximately 20 km/h (12 mph) or more with a rear seat belt not fastened not fastened, the seat belt warning buzzer in the combination meter assembly will sound once.
When have passed after the buzzer sounded, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 24 seconds.
After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 100 seconds.
FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
| Front seat inner belt assembly (for Driver Side) | Informs the main body ECU (multiplex network body ECU) assembly of the driver seat belt condition (fastened or unfastened). |
| Front seat inner belt assembly (for Passenger Side) | Informs the combination meter assembly of the front passenger seat belt condition (fastened or unfastened). |
| Separate type front seat cushion pad (occupant detection sensor) (for Passenger Side) | Informs the combination meter assembly of the front passenger seat condition (occupied or unoccupied). |
| Rear seat cushion pad sub-assembly (rear occupant detection sensor) | Informs the combination meter assembly of the rear seat condition (occupied or unoccupied). |
| Combination meter assembly | ·
Illuminates, blinks or turns off the seat belt warning light. ·
Sounds the seat belt warning buzzer. ·
Illuminates, blinks or turns off the rear seat belt warning light. |
·
Rear seat inner belt assembly LH ·
Rear seat inner with center belt assembly RH |
Informs the EV control ECU of each rear seat belt condition (fastened or unfastened). |
| Main body ECU (multiplex network body ECU) | Sends the driver side front seat innerr belt assembly signal to the combination meter assembly via CAN communication. |
| EV control ECU | Sends the shift position signal and rear seat belt condition (fastened or unfastened) to the combination meter assembly via CAN communication. |