CUSTOMIZE ADVANCED PARK
Customizing with the GTS
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Advanced Park Perpendicular Parking Control Area | Set available space when parking into garage. | Normal | $00:Narrow,$01:Normal,$02:Wide1,$03:Wide2 | Clearance warning ECU assembly |
| Advanced Park Parallel Parking Control Area | Set available space when parking in parallel. | Normal | $00:Narrow,$01:Normal,$02:Wide1,$03:Wide2 | Clearance warning ECU assembly |
Customize using multi-display
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Turn the ignition switch to ON.
Turn the panoramic view monitor switch on.
On the multi-display, enter the following menus: Advanced Park.
| Display | Measurement Item | Default | Setting | ECU |
|---|---|---|---|---|
|
*1: If set to Slightly Narrow or Narrow, the number of times the tires must be turned may increase *2: When the advanced park main switch is on, deletion of the registered parking location cannot be selected. |
||||
| Speed Mode | Sets the vehicle speed during parking assist | Standard | Slow, Standard, Fast | Clearance warning ECU assembly |
| Obstacle Avoidance Distance | Sets the obstacle avoidance distance during parking assist | Standard | Standard, Far | Clearance warning ECU assembly |
| Prioritized Parking Method | Sets the parking method to be prioritized for display when both perpendicular parking and parallel parking are possible | Parallel | Perpendicular, Parallel | Clearance warning ECU assembly |
| Parking Path Adjustment | Sets the path during parking assist | 0 | -3, -2, -1, 0, +1, +2, +3 | Clearance warning ECU assembly |
| Road Width Adjustment*1 | Sets the road width to be used by the vehicle during parking assist | Standard | Standard, Slightly Narrow, Narrow | Clearance warning ECU assembly |
| Delete Registered Parking Location*2 | Deletes registered information recorded using the memory function | - | - | Clearance warning ECU assembly |