85110
1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)
Check automatic stop position (for LH Side)
| *a | Ceramic Dot |
| *b | Windshield Glass Edge |
| *c | 7.2 to 22.2 mm (0.283 to 0.874 in.) |
| *d | 11.6 mm (0.457 in.) |
| *e | Reference value |
Operate the windshield wiper motor assembly and check the automatic stop position of the wiper arm after it is stopped.
After stopping, lift up the wiper arm 2 times before checking.
Check automatic stop position (for RH Side)
| *a | Ceramic Dot |
| *b | Windshield Glass Edge |
| *c | 9.4 to 24.4 mm (0.370 to 0.961 in.) |
| *d | 19.6 mm (0.772 in.) |
| *e | Reference value |
Operate the windshield wiper motor assembly and check the automatic stop position of the wiper arm after it is stopped.
After stopping, lift up the wiper arm 2 times before checking.
85110
2.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)
Check automatic stop position (for RH Side)
| *a | Ceramic Dot |
| *b | Windshield Glass Edge |
| *c | 7.2 to 22.2 mm (0.283 to 0.874 in.) |
| *d | 11.6 mm (0.457 in.) |
| *e | Reference value |
Operate the windshield wiper motor assembly and check the automatic stop position of the wiper arm after it is stopped.
After stopping, lift up the wiper arm 2 times before checking.
Check automatic stop position (for LH Side)
| *a | Ceramic Dot |
| *b | Windshield Glass Edge |
| *c | 9.4 to 24.4 mm (0.370 to 0.961 in.) |
| *d | 19.6 mm (0.772 in.) |
| *e | Reference value |
Operate the windshield wiper motor assembly and check the automatic stop position of the wiper arm after it is stopped.
After stopping, lift up the wiper arm 2 times before checking.