Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR
RM37H0E _59 Vehicle Exterior _095212 WIPER / WASHER _0455443 WASHER MOTOR G

WIPER / WASHER  WASHER MOTOR  INSPECTION  


PROCEDURE

Hide 85310 1.INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

HINT:

This check should be performed with the windshield washer motor and pump assembly installed to the washer jar.


a.

for Front Washer:

i.

Fill the washer jar with washer fluid.


ii.
E287656C46
1.531,0.271 1.896,0.5 0.365,0.229 1.917,1.229 2.198,1.656 true 1.542,1.229 1.281,1.667 true 0.188,0.156 0.5,0.313 0.313,0.156 10 false *a 1.583,0.302 2.042,0.5 0.458,0.198 10 false A10 2.177,1.667 2.635,1.865 0.458,0.198 10 false B 1.167,1.667 1.625,1.865 0.458,0.198 10 false SW
*a Component without harness connected
(Windshield Washer Motor and Pump Assembly)


Apply auxiliary battery voltage to the windshield washer motor and pump assembly and check that the washer fluid flows from the washer jar.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Terminal 2
Washer fluid flows from the washer jar


If the result is not as specified, replace the windshield washer motor and pump assembly.