Home › Vehicle Exterior › WIPER / WASHER › RELAY
RM37H0E _59 Vehicle Exterior _095212 WIPER / WASHER _0455447 RELAY G

WIPER / WASHER  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85948 1.INSPECT WINDSHIELD WIPER RELAY

a.
E209495C45
0.104,0.115 0.417,0.313 0.313,0.198 10 false *a
*a Component without harness connected
(Windshield Wiper Relay)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the windshield wiper relay.


Hide 85942C 2.INSPECT CAMERA CLEANER RELAY

a.
E209495C45
0.104,0.115 0.417,0.313 0.313,0.198 10 false *a
*a Component without harness connected
(Camera Cleaner Relay)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the camera cleaner relay.