Home › Power Source / Network › NETWORKING › CXPI COMMUNICATION SYSTEM
RM37H0E _57 Power Source / Network _095302 NETWORKING _0455451 CXPI COMMUNICATION SYSTEM D

NETWORKING  CXPI COMMUNICATION SYSTEM  SYSTEM DESCRIPTION  


CXPI COMMUNICATION SYSTEM DESCRIPTION


The multiplex communication system [CXPI] is used for communication systems between body system components. When communication fails due to an open circuit, etc. on the communication line, the function that outputs a DTC related to the circuit according to the control master ECU and the fail-safe function that maintains minimum performance and protects the system activate. (The following shows the communication system and connected ECUs.)

HINT:
·

Each component has a fail-safe function which activates to maintain the minimum performance of the system and protect the system.

·

In the following table, "○" indicates that the function applies, and "-" indicates that it does not.



Component Master Control CXPI Communication DTC Output Function
Main body ECU (multiplex network body ECU) ○ Output function enabled
No. 1 semiconductor power integration ECU (w/ PTC Heater) - Output function disabled
No. 2 semiconductor power integration ECU - Output function disabled
Room light control relay (for Front Side) (w/ Door Trim Illumination) - Output function disabled
Room light control relay (for Rear Side) (w/ Door Trim Illumination) - Output function disabled