Home › ADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › DYNAMIC RADAR CRUISE CONTROL SYSTEM
RM37H0E _95 ADAS / AD _095317 ADVANCED DRIVER ASSISTANCE SYSTEM _0455732 DYNAMIC RADAR CRUISE CONTROL SYSTEM C

ADVANCED DRIVER ASSISTANCE SYSTEM  DYNAMIC RADAR CRUISE CONTROL SYSTEM  U012587  Lost Communication With Multi-axis Acceleration Sensor Module Missing Message  U012687  Lost Communication with Steering Angle Sensor Module Missing Message  U012987  Lost Communication with Brake System Control Module Missing Message  U015587  Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message  U029387  Lost Communication with Hybrid/EV Powertrain Control Module Missing Message  U110687  Lost Communication with Electric Parking Brake Module Missing Message  


DESCRIPTION

The forward recognition camera communicates with each sensor and ECU via CAN communication.

If any malfunction is detected in a CAN communication circuit, one or more CAN communication system DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
U012587 Lost Communication With Multi-axis Acceleration Sensor Module Missing Message When a communication malfunction between the forward recognition camera and yaw rate sensor (airbag ECU assembly) continues for approximately 5 seconds or more while driving. CAN communication system Radar Cruise2 B
U012687 Lost Communication with Steering Angle Sensor Module Missing Message When the ignition switch is ON for 2 seconds or more, a communication error between the forward recognition camera and steering sensor continues for approximately 5 seconds or more. CAN communication system Radar Cruise2 B
U012987 Lost Communication with Brake System Control Module Missing Message When the ignition switch is ON for 2 seconds or more, a communication error between the forward recognition camera and No. 2 skid control ECU (brake actuator assembly) continues for 5 seconds or more. CAN communication system Radar Cruise2 B
U015587 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message When the ignition switch is ON for 2 seconds or more, a communication error between the forward recognition camera and combination meter assembly continues for 5 seconds or more. CAN communication system Radar Cruise2 B
U029387 Lost Communication with Hybrid/EV Powertrain Control Module Missing Message When the dynamic radar cruise control system is operating, a communication malfunction between the EV control ECU and forward recognition camera is detected for 5 seconds or more. CAN communication system Radar Cruise2 B
U110687 Lost Communication with Electric Parking Brake Module Missing Message When the ignition switch is ON for 2 seconds or more, a communication error between the forward recognition camera and No. 2 skid control ECU (brake actuator assembly) continues for 5 seconds or more. CAN communication system Radar Cruise2 B

PROCEDURE

1.CLEAR DTC (Radar Cruise2)

Pre-procedure1

a.

None


Procedure1

a.

Clear the DTCs.

Powertrain > Radar Cruise2 > Clear DTCs
50002 426
Result:
Proceed to
NEXT



Post-procedure1

a.

None



NEXT

2.CHECK FOR DTCs (Radar Cruise2)
2.CHECK FOR DTCs (Radar Cruise2)

Pre-procedure1

a.

Clear the DTCs.

Powertrain > Radar Cruise2 > Clear DTCs
50002 426

b.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



Procedure1

a.

Check for DTCs.

Powertrain > Radar Cruise2 > Trouble Codes
50001 426
Result:
Result Proceed to
CAN communication system DTC is not output A
CAN communication system DTC is output B



Post-procedure1

a.

None



A

B