CUSTOMIZE ROAD SIGN ASSIST SYSTEM
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the multi-information display
Turn the ignition switch to ON.
Select the setting by referring to the table below.
Using the steering pad switches, change the customize settings.
Each item is displayed on the "Setting" tab on the multi-information display.
| Display | Description | Setting | Default | Relevant ECU | |
|---|---|---|---|---|---|
|
*: The set vehicle speed differs depending on the country or area. |
|||||
| RSA | Road sign assist function setting | On / Off | On | Forward recognition camera | |
| Notification Method | Excess speed | Excess speed notification method setting | No Notification / Only Visual / Visual & Audio | Only Visual | Forward recognition camera |
| Overtaking | Overtaking prohibition notification method setting | No Notification / Only Visual / Visual & Haptic | Only Visual | Forward recognition camera | |
| Others | Other notification method setting | No Notification / Only Visual / Visual & Audio | Only Visual | Forward recognition camera | |
| Notification Level | Excess speed notification level setting* | 5 km/h /3 km/h /1 km/h | 1 km/h | Forward recognition camera | |
| 10 km/h (5 MPH) / 5 km/h (3 MPH) / 2 km/h (1 MPH) | 2 km/h (1 MPH) | Forward recognition camera | |||