Home › ADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › ROAD SIGN ASSIST SYSTEM
RM37H0E _95 ADAS / AD _095317 ADVANCED DRIVER ASSISTANCE SYSTEM _0455734 ROAD SIGN ASSIST SYSTEM C

ADVANCED DRIVER ASSISTANCE SYSTEM  ROAD SIGN ASSIST SYSTEM  U012587  Lost Communication with Multi-axis Acceleration Sensor Module Missing Message  U012987  Lost Communication with Brake System Control Module Missing Message  U014087  Lost Communication with Body Control Module Missing Message  U015587  Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message  U029387  Lost Communication with Hybrid/EV Powertrain Control Module Missing Message  


DESCRIPTION

The forward recognition camera communicates with each sensor and ECU via CAN communication.

If any malfunction is detected in a CAN communication circuit, one or more CAN communication system DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
U012587 Lost Communication with Multi-axis Acceleration Sensor Module Missing Message 3 seconds or more after the ignition switch is turned to ON, while the road sign assist system is on and the vehicle is being driven at 1 km/h or 1 mph or more, a communication error between the yaw rate sensor (airbag ECU assembly) and the forward recognition camera is detected for approximately 5 seconds or more. CAN communication system Road Sign Assist B
U012987 Lost Communication with Brake System Control Module Missing Message 3 seconds or more after the ignition switch is turned to ON, while the road sign assist system is on, a communication error between the No. 2 skid control ECU (brake actuator assembly) and the forward recognition camera is detected for approximately 5 seconds or more. CAN communication system Road Sign Assist B
U014087 Lost Communication with Body Control Module Missing Message 3 seconds or more after the ignition switch is turned to ON, while the road sign assist system is on, a communication error between the main body ECU (multiplex network body ECU) and the forward recognition camera is detected for approximately 5 seconds or more. CAN communication system Road Sign Assist B
U015587 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message 3 seconds or more after the ignition switch is turned to ON, while the road sign assist system is on, a communication error between the combination meter assembly and the forward recognition camera is detected for approximately 50 seconds or more. CAN communication system Road Sign Assist B
U029387 Lost Communication with Hybrid/EV Powertrain Control Module Missing Message 3 seconds or more after the ignition switch is turned to ON, while the road sign assist system is on and the vehicle is being driven at 1 km/h or 1 mph or more, a communication error between the EV control ECU and the forward recognition camera is detected for approximately 5 seconds or more. CAN communication system Road Sign Assist B

PROCEDURE

1.CLEAR DTC

Pre-procedure1

a.

None


Procedure1

a.

Clear the DTCs.

Body Electrical > Road Sign Assist > Clear DTCs
50002 431
Result:
Proceed to
NEXT



Post-procedure1

a.

None



NEXT

2.CHECK FOR DTCs
2.CHECK FOR DTCs

Pre-procedure1

a.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



Procedure1

a.

Check for DTCs.

Body Electrical > Road Sign Assist > Trouble Codes
50001 431
Result:
Result Proceed to
DTCs are not output A
DTCs are output B



Post-procedure1

a.

None



A

B