Home › Suspension › FRONT SUSPENSION › FRONT SHOCK ABSORBER
RM37H0E _53 Suspension _097405 FRONT SUSPENSION _0455867 FRONT SHOCK ABSORBER G

FRONT SUSPENSION  FRONT SHOCK ABSORBER  INSPECTION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 48520 1.INSPECT FRONT SHOCK ABSORBER ASSEMBLY

a.

Compress and extend the front shock absorber assembly rod 4 times or more.

Standard:

When compressed and extended at a constant speed, the stroke of the shock absorber rod is smooth with no abnormal resistance or sounds. When extended, the shock absorber rod returns to its original position at a constant speed with no abnormal sounds.


HINT:

If there are any abnormalities, replace the front shock absorber assembly with a new one.