Home › Suspension › REAR SUSPENSION › REAR SHOCK ABSORBER
RM37H0E _53 Suspension _097406 REAR SUSPENSION _0455873 REAR SHOCK ABSORBER G

REAR SUSPENSION  REAR SHOCK ABSORBER  INSPECTION  


PROCEDURE

Hide 48540 1.INSPECT REAR SHOCK ABSORBER ASSEMBLY

a.

Compress and extend the rear shock absorber assembly rod 4 times or more.

Standard:

When compressed and extended at a constant speed, the stroke of the shock absorber rod is smooth with no abnormal resistance or sounds. When extended, the shock absorber rod returns to its original position at a constant speed with no abnormal sounds.


HINT:

If there are any abnormalities, replace the rear shock absorber assembly with a new one.