CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM
When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.
The following items can be customized.
Customizing with the GTS
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Auto Operation Interference Avoidance Function | Setting for availability of auto adjustment function that avoids interference between headrest and roof headlining during driver seat operation. | ON | 0:ON,1:OFF | Position control ECU assembly LH (for LHD), Position control ECU assembly RH (for RHD) |
| Seat Move Distance | Setting of seat slide distance for power easy access system. | Standard | 00:OFF,01:Little,10:Standard | Main body ECU (multiplex network body ECU) |
Customizing with the multi-display.
Turn the ignition switch to ON.
Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Other Vehicle Settings.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Driver's seat Easy-Exit Slide | Allows customizing of the seat movement distance for the power seat power easy access system. | Full | Off / Partial / Full | Main body ECU (multiplex network body ECU) |