Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM
RM37H0E _56 Audio / Visual / Telematics _095260 AUDIO / VIDEO _0455059 AUDIO AND VISUAL SYSTEM J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  Miracast cannot be started  


PROCEDURE

1.CHECK DEVICE
a.

Check whether the customer's device supports "Miracast" functionality.

HINT:

For supported devices, Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>SYSTEM DESCRIPTION



Result:
Result Proceed to
The customer's device supports "Miracast" functionality A
The customer's device does not support "Miracast" functionality B



A

2.CHECK DEVICE SETTINGS

B

CHECK USING ANOTHER "Miracast" COMPATIBLE DEVICE

2.CHECK DEVICE SETTINGS
a.

Check whether the "Miracast" functionality is set to "On" in the settings of the customer's device.

HINT:
·

"Miracast" is normally set to "Off" by default. As a result, the setting must be manually changed to "On".

·

The operation method differs depending on the device. The name "Miracast" also refers to "Screen Mirroring" and "Media Output", etc.




Result:
Result Proceed to
"Miracast" functionality is set to "On" in the settings of the customer's device A
"Miracast" functionality is not set to "On" in the settings of the customer's device B



A

3.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY

B

CHECK AFTER TURNING "Miracast" FUNCTIONALITY TO "ON"

3.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
a.

Check that the "Wi-Fi power" setting is "On" in the "Wi-Fi" settings on the multi-display.


b.

Check that the "Bluetooth power" setting is "Off" on the multi-display.


HINT:

Bluetooth and "Miracast" and "Wi-Fi" use the same 2.4 GHz band radio waves. As a result, the connection may suffer from outages due to radio interference if connecting simultaneously.


Result:
Proceed to
NEXT



NEXT

4.CHECK CONNECTION RESULT
4.CHECK CONNECTION RESULT
a.

Check connection:

i.

Check the connection between the device and "Miracast" on the multi-display in the vehicle and on the device itself.


ii.

Allow Miracast video to be streamed to the multi-display and wait for 15 seconds.


iii.

Check that the smart phone screen is displayed on the multi-display.



HINT:

If the "Miracast" connection cannot be established even after checking, check the connection again.


Result:
Result Proceed to
Smartphone screen is displayed on the multi-display A
"Miracast" connection cannot be established even after performing the above connection check twice B



A

B

5.CHECK USING ANOTHER DEVICE
5.CHECK USING ANOTHER DEVICE
a.

Check using another "Miracast" supported device.


Result:
Result Proceed to
Established connection with "Miracast" A
Could not establish connection with "Miracast" B



A

END (DEVICE IS DEFECTIVE)

B

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY