Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM
RM37H0E _56 Audio / Visual / Telematics _095293 PARK ASSIST / MONITORING _0455111 TOYOTA PARKING ASSIST-SENSOR SYSTEM C

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM  C1AF187  Ultrasonic Sensor (Rear Left Side) Missing Message  


DESCRIPTION

This DTC is output when an open circuit or short occurs in the communication line between a rear side ultrasonic sensor (RLS sensor) and the rear side ultrasonic sensor (RRS sensor), or when a malfunction occurs in a rear side ultrasonic sensor (RLS sensor) on the rear.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
C1AF187 Ultrasonic Sensor (Rear Left Side) Missing Message Rear side ultrasonic sensor (RLS sensor) lost communication
·

Rear side ultrasonic sensor (RLS sensor)

·

Harness or connector

·

Clearance warning ECU assembly


Clearance Warning B

WIRING DIAGRAM

E396746E15
5.104,1.938 6.635,2.281 1.531,0.344 10 false Clearance Warning ECU Assembly 5.094,1.781 5.771,2.01 0.677,0.229 10 false G20 2.729,1.938 4.521,2.344 1.792,0.406 10 false Rear Side Ultrasonic Sensor (RRS sensor) 2.729,1.781 3.75,1.948 1.021,0.167 10 false J24 0.396,1.781 1.417,1.948 1.021,0.167 10 false J25 0.396,1.938 2.156,2.406 1.76,0.469 10 false Rear Side Ultrasonic Sensor (RLS sensor) 3.073,0.969 3.385,1.167 0.313,0.198 10 false SO 3.094,0.583 3.406,0.781 0.313,0.198 10 false BO 3.094,1.323 3.406,1.521 0.313,0.198 10 false EO 1.646,0.615 1.958,0.813 0.313,0.198 10 false BI 1.698,1.333 2.01,1.531 0.313,0.198 10 false EI 3.979,0.979 4.292,1.177 0.313,0.198 10 false SI 3.958,0.604 4.271,0.802 0.313,0.198 10 false BI 3.969,1.333 4.281,1.531 0.313,0.198 10 false EI 5.344,0.969 5.708,1.167 0.365,0.198 10 false LIN2 5.354,0.563 5.771,0.76 0.417,0.198 10 false CSB2 5.354,1.333 5.771,1.531 0.417,0.198 10 false CSG2 5.073,1.198 5.438,1.396 0.365,0.198 10 false 23 4.24,0.844 4.604,1.042 0.365,0.198 10 false 5 5.073,0.833 5.438,1.031 0.365,0.198 10 false 22 4.229,0.479 4.594,0.677 0.365,0.198 10 false 4 4.219,1.198 4.583,1.396 0.365,0.198 10 false 6 5.063,0.479 5.427,0.677 0.365,0.198 10 false 24 2.865,0.854 3.229,1.052 0.365,0.198 10 false 2 2.875,0.51 3.24,0.708 0.365,0.198 10 false 1 2.865,1.188 3.229,1.385 0.365,0.198 10 false 3 1.958,0.865 2.323,1.063 0.365,0.198 10 false 5 1.948,0.531 2.313,0.729 0.365,0.198 10 false 4 1.948,1.198 2.313,1.396 0.365,0.198 10 false 6 1.656,0.979 1.969,1.177 0.313,0.198 10 false SI

CAUTION / NOTICE / HINT

NOTICE:
·

Perform registration after replacing or removing and installing the ultrasonic sensor or clearance warning ECU assembly.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM>CALIBRATION

·

If a DTC is detected again after the repair, turn the ignition switch to ON and turn the TOYOTA parking assist-sensor system on, and then clear the DTC.

·

If C1AF296 is output at the same time, check C1AF296 first.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM>C1AF296



PROCEDURE

1.VEHICLE CONDITION AND WORK DETAILS CHECK
a.

Check the vehicle condition and work details.


Result:
Result Proceed to
The clearance warning ECU assembly or ultrasonic sensor has not been replaced A
The clearance warning ECU assembly or ultrasonic sensor has been replaced B



A

2.CHECK CONNECTOR CONNECTION CONDITION (ULTRASONIC SENSOR)

B

2.CHECK CONNECTOR CONNECTION CONDITION (ULTRASONIC SENSOR)
a.

Check that the connector is properly connected to the rear side ultrasonic sensor.


Result:
Proceed to
NEXT



NEXT

3.CLEAR DTC
3.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Clearance Warning > Clear DTCs
50002 438

Result:
Proceed to
NEXT



NEXT

4.CHECK FOR DTC
4.CHECK FOR DTC
a.

Check for DTCs.

Body Electrical > Clearance Warning > Trouble Codes
50001 438

Result:
Result Proceed to
C1AF187 is not output A
C1AF187 is output B



A

END (CONNECTOR CONNECTION MALFUNCTION)

B

5.CHECK CONNECTOR CONNECTION CONDITION (CLEARANCE WARNING ECU ASSEMBLY)
5.CHECK CONNECTOR CONNECTION CONDITION (CLEARANCE WARNING ECU ASSEMBLY)
a.

Check that the connector is properly connected to the clearance warning ECU assembly.


Result:
Proceed to
NEXT



NEXT

6.CLEAR DTC
6.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Clearance Warning > Clear DTCs
50002 438

Result:
Proceed to
NEXT



NEXT

7.CHECK FOR DTC
7.CHECK FOR DTC
a.

Check for DTCs.

Body Electrical > Clearance Warning > Trouble Codes
50001 438

Result:
Result Proceed to
C1AF187 is not output A
C1AF187 is output B
C1AF187 and C1AF287 are output C



A

B

8.CHECK HARNESS AND CONNECTOR (REAR SIDE ULTRASONIC SENSOR [RRS SENSOR] - REAR SIDE ULTRASONIC SENSOR [RLS SENSOR])

C

8.CHECK HARNESS AND CONNECTOR (REAR SIDE ULTRASONIC SENSOR [RRS SENSOR] - REAR SIDE ULTRASONIC SENSOR [RLS SENSOR])

Pre-procedure1

a.

Disconnect the J24 rear side ultrasonic sensor (RRS sensor) connector.


b.

Disconnect the J25 rear side ultrasonic sensor (RLS sensor) connector.


Procedure1

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(J24,J25)Location & Routing

Click Connector(J24)Body>No. 1 Luggage Room Wire / No. 3 Luggage Room Wire>Rear Side Ultrasonic Sensor RH

Click Connector(J25)Body>No. 1 Luggage Room Wire / No. 3 Luggage Room Wire>Rear Side Ultrasonic Sensor LH

J24-1 (BO) - J25-4 (BI) Always Below 1 Ω
J24-2 (SO) - J25-5 (SI) Always Below 1 Ω
J24-3 (EO) - J25-6 (EI) Always Below 1 Ω
J24-1 (BO) or J25-4 (BI) - Body ground Always 10 kΩ or higher
J24-2 (SO) or J25-5 (SI) - Body ground Always 10 kΩ or higher
J24-3 (EO) or J25-6 (EI) - Body ground Always 10 kΩ or higher


Result:
Proceed to
OK
NG



Post-procedure1

a.

None



OK

9.REPLACE REAR SIDE ULTRASONIC SENSOR (RLS SENSOR)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

9.REPLACE REAR SIDE ULTRASONIC SENSOR (RLS SENSOR)
a.

Replace the rear side ultrasonic sensor (RLS sensor) with a known good one.

HINT:

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>ULTRASONIC SENSOR (for Rear)>REMOVAL


HINT:

All of the sensors are interchangeable. To confirm whether a sensor is functioning normally, switch it with a known good sensor from the other end of the vehicle.



Result:
Proceed to
NEXT



NEXT

10.CLEAR DTC
10.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Clearance Warning > Clear DTCs
50002 438

Result:
Proceed to
NEXT



NEXT

11.CHECK FOR DTC
11.CHECK FOR DTC
a.

Check for DTCs.

Body Electrical > Clearance Warning > Trouble Codes
50001 438

Result:
Result Proceed to
C1AF187 is not output A
C1AF187 is output B



A

END (REAR SIDE ULTRASONIC SENSOR [RLS SENSOR] WAS DEFECTIVE)

B