CUSTOMIZE SEAT HEATER SYSTEM
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
The following items can be customized.
Customizing with the GTS
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| FL Seat A/C and Heater Sensitivity Adjust | Function to change sensitivity of the seat heater system. | 0 | 10000:-2,01000:-1,00100:0,00010:+1,00001:+2 | Air conditioning amplifier assembly |
| FR Seat A/C and Heater Sensitivity Adjust | Function to change sensitivity of the seat heater system. | 0 | 10000:-2,01000:-1,00100:0,00010:+1,00001:+2 | Air conditioning amplifier assembly |
Customizing with the Multi-display
Turn the ignition switch ON.
Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Climate Settings.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| FR L seat temp. auto ctrl. mode | 0 | Function to change sensitivity of the seat heater system. | -2 / -1 / 0 / +1 / +2 | Air conditioning amplifier assembly |
| FR R seat temp. auto ctrl. mode | 0 | Function to change sensitivity of the seat heater system. | -2 / -1 / 0 / +1 / +2 | Air conditioning amplifier assembly |
| RR L seat temp. auto ctrl. mode | 0 | Function to change sensitivity of the seat heater system. | -2 / -1 / 0 / +1 / +2 | Air conditioning amplifier assembly |
| RR R seat temp. auto ctrl. mode | 0 | Function to change sensitivity of the seat heater system. | -2 / -1 / 0 / +1 / +2 | Air conditioning amplifier assembly |