Home › Suspension › TIRE / WHEEL › TIRE AND WHEEL SYSTEM
RM37H0E _53 Suspension _095080 TIRE / WHEEL _0464912 TIRE AND WHEEL SYSTEM G

TIRE / WHEEL  TIRE AND WHEEL SYSTEM  INSPECTION  


PROCEDURE

Hide 1.INSPECT TIRES

Cold Tire Inflation Pressure(Front):
Tire Size Specified Condition
235/55R19 101V 230 kPa
2.3 kgf/cm2
33 psi
245/45ZR20 103Y 230 kPa
2.3 kgf/cm2
33 psi


Cold Tire Inflation Pressure(Rear):
Tire Size Specified Condition
235/55R19 101V 230 kPa
2.3 kgf/cm2
33 psi
245/45ZR20 103Y 230 kPa
2.3 kgf/cm2
33 psi


NOTICE:

If the tire pressure is adjusted to the cold tire inflation pressure when the tires are warm, the tire pressure warning indicator may be on when the tires become cold.


a.

Tire pressure adjustment method when tires are warm:

i.

Check Data List for "Tire Inflation Pressure".


ii.

Adjust the "Tire Inflation Pressure" to the cold tire inflation pressure.


iii.

Initialize the tire pressure warning system.

HINT:

Click hereSuspension>TIRE PRESSURE MONITORING>TIRE PRESSURE WARNING SYSTEM>INITIALIZATION



iv.

Check Data List for "Temperature in Tire" (°C).


v.

Subtract the ambient temperature (°C) from the "Temperature in Tire" (°C).


vi.

Adjust the tire pressure to the cold tire inflation pressure plus the subtraction above.



Hide 2. ROTATE TIRES

After the tire rotation, initialize the tire pressure warning system.

C224078C03
0,0 0,0 false
V100135

Front


HINT:

Click hereSuspension>TIRE PRESSURE MONITORING>TIRE PRESSURE WARNING SYSTEM>INITIALIZATION


Hide 3.INSPECT WHEEL BALANCE

C202467C04
0.604,3.521 0.917,3.719 0.313,0.198 10 false *a 2.073,3.646 2.385,3.844 0.313,0.198 10 false *a
*a Adhesive wheel balance weight


Tire Wheel Imbalance:
Specified Condition
8 g or less
0.28 oz or less


C137874

Tire Wheel Runout:
Specified Condition
1 mm or less
0.039 in. or less