Home › Vehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY
RM37H0E _58 Vehicle Interior _095297 SEAT BELT _0448142 REAR SEAT OUTER BELT ASSEMBLY G

SEAT BELT  REAR SEAT OUTER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73370E 1.INSPECT REAR SEAT OUTER BELT ASSEMBLY LH

a.
B607697C03
0.271,1.656 0.583,1.813 0.313,0.156 10 false *a 1.854,3.25 2.167,3.406 0.313,0.156 10 false *b 0.885,2.563 1.198,2.719 0.313,0.156 10 false *c
*a Unlock
*b Lock
*c 45°


Before installing the rear seat outer belt assembly LH, check the ELR function.

NOTICE:

Do not disassemble the retractor.


i.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the result is not as specified, replace the rear seat outer belt assembly LH.



Hide 73360D 2.INSPECT REAR SEAT OUTER BELT ASSEMBLY RH

a.
B607697C04
0.271,1.656 0.583,1.813 0.313,0.156 10 false *a 1.854,3.25 2.167,3.406 0.313,0.156 10 false *b 0.885,2.563 1.198,2.719 0.313,0.156 10 false *c
*a Unlock
*b Lock
*c 45°


Before installing the rear seat outer belt assembly RH, check the ELR function.

NOTICE:

Do not disassemble the retractor.


i.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the result is not as specified, replace the rear seat outer belt assembly RH.