81230
1.INSPECT COURTESY LIGHT ASSEMBLY (for LH Side)
| *a | Component without harness connected
(Courtesy Light Assembly) |
Check the illumination.
Apply auxiliary battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
|
Click Location & Routing(F22)Location & Routingewd_type=routing;type=c;code=F22 Click Connector(F22)Body>No. 1 Rear Door Wire / No. 2 Rear Door Wire>Rear Courtesy Light Assembly LHewd_type=component;type=c;code=F22;pinno=2,1 |
|
| F22-2 (B) - Auxiliary battery positive (+)
F22-1 (SW) - Auxiliary battery negative (-) |
Courtesy light assembly illuminates |
If the result is not as specified, replace the courtesy light assembly.
81230
2.INSPECT COURTESY LIGHT ASSEMBLY (for RH Side)
| *a | Component without harness connected
(Courtesy Light Assembly) |
Check the illumination.
Apply auxiliary battery voltage to the connector and check the light illumination condition.
| Tester Connection | Specified Condition |
|---|---|
|
Click Location & Routing(F11)Location & Routingewd_type=routing;type=c;code=F11 Click Connector(F11)Body>No. 1 Rear Door Wire / No. 2 Rear Door Wire>Rear Courtesy Light Assembly RHewd_type=component;type=c;code=F11;pinno=2,1 |
|
| F11-2 (B) - Auxiliary battery positive (+)
F11-1 (SW) - Auxiliary battery negative (-) |
Courtesy light assembly illuminates |
If the result is not as specified, replace the courtesy light assembly.